Feature |
Compass
Logger |
| Current firmware version |
3.31.6074 R0 |
| Update date |
2006/04/21 |
| user manual |
Download |
| Firmware download |
Download |
| Access Tool |
G-Tool(FOR PC) ----- Simple
G-Tool(FOR PPC) |
| USB Driver |
Goto |
| Update Information |
3.31.6074 R0 (2006/04/19)
|
Specification |
| Chips |
- u-Nav + iTrax 3rd generation of least power consumption with highest
sensitivity
|
| Number of channels |
- Receivable of signal from 12 satellites simultaneously
|
| Receiving freq. |
|
| Receiving code |
|
| Sensitivity |
|
| TTFF (average) |
- Quick Start: < 3 sec(within 25 min from last signal)
- Cold start time:40 sec
- Warm start time :38 sec
- Hot start time : 8 sec
|
| Re-acquisition time |
|
| Data update ratio |
|
| Accuracy |
- Position error:
- < 3 meter when 3D error is at 95%
- < 6 meter when 2D vertical error is 95%
- Speed: error within 0.2 meter per sec
- Acceleration: Maximum 4G (G is gravity unit)
- Time:20ns
- Supportive GPS features: Accessible to EGNOS/WAAS(Reservation Now)
|
| Logger spec. |
- Maximum data up to 12680
- Recording in a circular way
- Auto-logging goes on without the need
of any device
- Log-data can be read out using the
G-tool software included
- Data can be read out thru USB or bluetooth
- Data includes latitude, longitude, time
in year-month-date-min-sec
- Four ways for log mode
- Disable Logger mode
- Log by interval of time mode
- Log by interval of range mode
- Auto log mode(depend on speed auto-change
log interval)
|
| Size |
- Measurement (L) .0 x (W).0 x (H).0 mm
|
| Environmental specs |
- Working temp range:-10℃~70℃( internal temp)
- Storage temp range:-40℃~85 ℃
|
| USB specs |
- Interface type::Standard USB connector of computer
- Data transfer rate:9600bps
|
| Data output |
- GPS internal standard axis WGS84
- NMEA-183 Version 3.0. ASCII output
- GPRMC (default)
- GPGSV (default)
- GPGSA (default)
- GPGGA (default)
- GPGLL
- GPVTG
- GPZDA
|
| Compass Accuracy |
|